Sparx

Coarse grinding ring that quickly removes the old hollow and nicks – the preparation for a new sharpening.

Flat-bottom hollow from Sparx: the grip of the same-size radius, plus noticeably more glide. In 3/8", 1/2", 5/8" and 3/4".

Checks whether the inside and outside edges of your blade are the same height – accurate to 0.001 inch according to Sparx.

The classic hollow for your Sparx skate sharpener. In 16 radii from 1/4" to 1 1/2" – for players and goalies.

Air filter, cleaning wipes, glass wipes and lubricant for your Sparx Sharpener 2 or 3. Recommended every 200 sharpenings.

Three grinding rings in one set: 1/2" Radius, 5/8" Radius and 1/2" FIRE – according to Sparx, the three most commonly used hollows.

With these adapters you sharpen figure skates in the Sparx Sharpener 2 and 3. Fits most classic blades.

The third generation of the Sparx skate sharpener for home use – in the version without BEAM. You order the grinding ring separately.

Custom-fit cover made of robust nylon: protects your Sparx Sharpener 2 or 3 when it is not in use.

Honing stone (240 grit) and leather strop in one set – the deburring tool supplied with every Sparx skate sharpener, available to buy separately.

Third-generation Sparx skate sharpener together with the BEAM laser measuring device. You order the grinding ring separately.

The honing set for coated blades: a soft, rubberised stone that removes the burr without attacking the coating – plus a leather strop.

Light, robust bag for your Sparx Sharpener 2 or 3 – with backpack straps and a shoulder strap. No hard-shell protection, not for air travel.

Small inserts for the skate clamp: they let you sharpen further forward at the toe and make the transition area smaller.

Genuine Sparx riser for FeatherBlend on the Sharpener 3 (ES300). Single accessory, not the complete kit.

Genuine Sparx kit with FeatherBlend Riser and FLAT Grinding Ring for the Sharpener 3 (ES300).

Deburrs freshly sharpened blades in seconds – without a honing stone and without you having to touch the sharp edge. For home and for the team.

Risers for goalie skates with a cowling. Without a cowling, you sharpen as normal and do not need them.

The Sparx deburring machine in the Commercial version – for pro shops, clubs and service areas with high throughput.

One twist, one click: with the Sparx Blade Holder you sharpen spare blades without mounting them on the skate.

Fine honing stone made of aluminium oxide for deburring freshly sharpened blades. 320 grit, for fine finishing.

The wide holder for loose blades with a thickness of 4 mm – for sharpening without the skate in the Sparx skate sharpener.

Three fine honing stones made of aluminium oxide in one pack. 320 grit, for deburring and fine finishing – for shops, clubs and frequent sharpeners.

Holder for loose 3 mm blades: goalie blades, sled hockey blades, 3 mm player blades and steel for the TRUE SHIFT Holder.

Replacement power cord for the first-generation Sparx skate sharpener (ES100). Does not fit Sharpener 2 and Sharpener 3.

Guide for 4 mm thick blades in the Sparx SAMURAI – as found on some goalie and figure skates.

Coarse honing stone made of aluminium oxide for deburring freshly sharpened blades. 100 grit – the coarsest of the three Premium Honing Stones.

Sparx Sharpener 3 Pro with Pro Base, BEAM, three grinding rings and accessories for sharpening, finishing and transport.

Custom-made hard travel case with wheels for your Sparx Sharpener 2 or 3 – including an accessory case.

Five replacement abrasive pads for the Sparx deburring block. Attach by hook-and-loop, for regular steel.

Two wooden blocks with a firm grip for deburring: one with an abrasive pad for regular steel, one with a leather strop for coated or black steel.

One replacement leather strop for the Sparx deburring block. Attaches by hook-and-loop, for coated or black steel.

Replacement disc for the Sparx SAMURAI At-Home. Lasts for approx. 200 pairs of skates according to Sparx; changed without tools.

Stand made of heavy-duty steel: sets the Sparx SAMURAI At-Home upright and gives you more stability and a better view of the blade.

Replacement disc for the Sparx SAMURAI Commercial. Does not fit the At-Home machine.

Unpack and start sharpening: Sparx Sharpener 3, BEAM laser measuring device and three grinding rings in one bundle.

Steel docking station with glass door for the Sparx Sharpener 2 (ES200) and Sharpener 3 (ES300). Supplied without skate sharpener.

Sparx Sharpener 3 with BEAM, three grinding rings and the most frequently purchased accessories: Blade Holder, Deburring Block Set, cover and Soft Travel Case.

Custom hard travel case with wheels for Sparx skate sharpeners with Pro Base: Sharpener 3 Pro, PS300 and Sharpener Team.

The largest Sparx bundle: Sharpener 3 Pro with Pro Base, BEAM, three grinding rings and almost the entire range of Sparx accessories, including three additional honing stones.

The third-generation Sparx skate sharpener with the Pro Base as a docking station, a standard base for travel and the BEAM laser measuring device.

Grinding ring specifically for bandy skates: flat sharpening for the long, flat bandy blade.

Medium honing stone made of aluminium oxide for deburring freshly sharpened blades. 240 grit.

Replacement or second guide for the Sparx SAMURAI. For 3 mm thick blades – the thickness of most current skates.

Laser measuring device from Sparx: checks whether both edges of your blade are the same height and helps you align the skate sharpener.

Holds loose blades and replacement steel securely and straight during sharpening. For all common steel types – and for the Sparx SAMURAI.